



Wydajność cięcia:
Manewrowość
Opcje cepów:
Silnik i napęd:
Opcje
Zastosowania:
| Model | HP | Liczba cepów | Szerokość cięcia (cm) | Typ zasilania | Waga | Transport | ||
|---|---|---|---|---|---|---|---|---|
| Delta | Y Flai | Rozpulchniać | ||||||
| MP75W | 13,5 | 20 | 40 | 20 | 75 | Benzyna Briggs & Stratton | 195 | Koła samobieżne |
| MP75T | 13,5 | 20 | 40 | 20 | 75 | Benzyna Briggs & Stratton | 270 | Gąsienice samobieżne |
Choose the wheeled Motofrog (MP75W) for moderate terrain and the tracked Motofrog (MP75T) for extra traction and stability on rough or steep ground. Both have the same 13.5 hp Briggs & Stratton engine and 75 cm cut. Dual wheels are also available as an option.
The Peruzzo Motofrog 75 cuts 75 cm, and the whole unit is only 90 cm wide, so it fits through gates and narrow access points. Overall dimensions are 1.8 m long, 0.90 m wide and 1.25 m high. It has 4 forward and 2 reverse gears for manoeuvring on awkward sites.
Ryetec's Mini Flail Mower suits compact tractors from 12.5 hp, with minimums of 12.5–18 hp across its 960–1600 mm widths. The Professional Flail Mower needs 18–30 hp for 1.2–1.8 m. The HD Professional needs 35–55 hp for 1.6–2.0 m, the Contractor Flail Mower suits 30–130 hp up to 2.8 m, and the Triflex gang mower needs 70–80 hp for 4.2–5.0 m.
Y flails are the standard choice for general grass mowing. Paddle flails give a finer lawn finish. Hammer or cast Delta flails are heavier and suit long grass, scrub and prunings; Ryetec Contractor hammers shred shoots up to 5–6 cm. Scarifying blades remove thatch from turf.
A flail mower uses many small flails on a horizontal rotor, chopping material finely and spreading it evenly, so it handles long grass, scrub and prunings and leaves a tidier finish. A topper uses one or two large blades on a vertical shaft and is mainly used for topping pasture.
For steep banks, the ROBOFOX remote control flail mower works on slopes up to 55° (ELECTRA) or 45° (HYBRID), operated from up to 150 m away. For rough or narrow ground, the Peruzzo Motofrog is a walk-behind flail mower with a 75 cm cut. Offset and multi-use flail mowers reach verges, ditches and banks from the tractor.
Do you have any questions regarding this model or any of our other used machinery stock? Please give a call using the number below or email us.
Please contact us to check the machine location before travelling.
Mill House, East Knapton
Malton, North Yorkshire, YO17 8JA
Get In Touch